Similar Posts
Surface Drive Progress… Sorta – BAR HOPPER
I had been begrudging the cost of the motor for the Twister surface drive I bought for Bar Hopper. Initially I had planned on a Predator 670 V-twin from Harbor Freight. Its about a thousand dollars at this time, but its a 22hp motor. That’s 22 crankshaft horsepower. There is really no other way to…
Bob’s Tips For Boaters #1 – Make a Check List AND CHECK IT
Plug, keys, safety equipment, lunch, beverages, trailer connections, straps and hooks secured, fishing gear, hunting gear, camera, cell phone, radio, spare tire, etc, etc, This should be a list of things you should check and make sure you have before you hit the road, and then maybe a second list to double check before you…
Short Long Tail – (updated Sep-8-23)
You probably haven’t heard much about the Valco 14 footer I picked up a while back. That’s because I haven’t done much with it. We got it off the flat bed trailer and flipped it upside down in front of the house. That’s where it’s set for the last couple years. It may be a…
Stream Flow For Arizona – BOOKMARK THIS PAGE
The Main Page From USGS https://waterdata.usgs.gov/az/nwis/current/?type=flow Everything you need on one page.
Button Panel Roasted By The Sun – V176 Magnum 2002
Button Panel Roasted By The Sun – V176 Magnum 2002 A buddy of mine has completely quit fishing and he offered me his 2002 Triton V176 Magnum for very little with its Johnson 90. The carbs were totally gunked up which was no surprise. I’ve cleaned carbs before. This Johnson has something I haven’t seen…
Holeshot & Ride
Hole shot generally refers to how long it takes your boat to go from displacement to plaining speed. For most plaining hulls the best hole shot is accomplished by trimming the motor/outdrive all the way down, and going full throttle as quickly as possible. Push the throttle all the way to the stop very quickly…