Two New Jig Molds Coming Soon – Discount Code For TACKLEMAKER.info Forum Members

ByBob La Londe November 20, 2024November 21, 2024

Two New Jig Molds Coming Soon – Discount Code For Forum Members
See rules at post linked below.
https://www.tacklemaker.info/index.php?topic=95.0

Tackle Making

Bending Pull Pins For 10 Weight Lead Net Sinker Mold
ByBob La Londe March 16, 2024

Read More Bending Pull Pins For 10 Weight Lead Net Sinker Mold
General Information | Tackle Making

The Internet Makes Small Maker Businesses Possible
ByBob La Londe June 16, 2025

The Internet is absolutely what makes many small maker businesses possible. Without it, I’d probably never have gotten into mold making, and even if I had I’d be relegated to advertising in the classifieds in the back of trade and hobby magazines.I do trade worldwide because of the Internet. I have customers from Australia and…

Read More The Internet Makes Small Maker Businesses Possible
Fishing | Tackle Making

Is White a Color?
ByBob La Londe August 19, 2023August 26, 2023

This was the first time I had ever actually fished with this little resin poured crank bait. I had made the original mold over a year prior. (Five years ago now.) I made a few baits and tested them in the pool before shipping off the first molds. I made some more of the mold,…

Read More Is White a Color?
Fishing | Tackle Making

Curly Buzz Frog Tips – Mustad 38112
ByBob La Londe December 30, 2023December 31, 2023

I had previously touted the Mustad 91768 with a snap on screw lock as the best (and probably cheapest) hooks for the Curly Buzz Frogs in all sizes. More recently I had noted I could go up a size using the heavier and stronger 38112 instead, except I didn’t think they made a 38112 small…

Read More Curly Buzz Frog Tips – Mustad 38112
Tackle Making

Is JB Weld Any Good
ByBob La Londe December 21, 2024December 21, 2024

JB Weld melts at a lower temp than lead. Why do people use it? Lots of people use JB Weld, because the amount… (more at link) https://www.tacklemaker.info/index.php?topic=109.0

Read More Is JB Weld Any Good
Bob's Other Projects | Tackle Making

Making a Fixture Plate to Cut Four Parts at Once Instead of Just One
ByBob La Londe December 7, 2024

Making a Fixture Plate to Cut Four Parts at Once Instead of Just One If I throw a piece of material in the vise I can make one part. If I throw a fixture plate in the vise I can make as many parts as will fit in the work envelope of the machine with…

Read More Making a Fixture Plate to Cut Four Parts at Once Instead of Just One

Similar Posts