Similar Posts
The Ten Weight Cast Net Sinker Mold
These are called a “Ten Weight” net weight because 10 of them will make up one pound (+/-). If you use pure lead and get perfect pours it will be a little over a pound, but pretty close. If you use unknown lead alloys or get less than perfect pours it a count of ten…
TIG welding arcs that look through my helmet like the arc shots on YouTube videos – Tackle Making – REALLY!
I’ve always struggled as a welder, but eventually I get it most times. One thing I do when it has to work the first time is cut some stock piece the same size and make a few practices welds before welding the work piece. I did this a lot learning to MIG weld aluminum. It…
Cast Spiral Keeper Experiment
The buttress thread spiral bait keeper has an edge radius of only 1/64th of an inch to get that “sharp” edge I think it would need to work. As a result that whole feature would need to be finished with at max a 1/32 ball nose end mill. The time to finish would be fairly…
Two First Days With the J-Bug 125 – Success
Pictures & Video: I took it out one day and tried it out in a little by water, and then a customer sent me some pictures of his first baits with the J-Bug mold and his first day on the water. “Finaly i got the mold, so i made some baits right away, i like…
Making a Fixture Plate to Cut Four Parts at Once Instead of Just One
Making a Fixture Plate to Cut Four Parts at Once Instead of Just One If I throw a piece of material in the vise I can make one part. If I throw a fixture plate in the vise I can make as many parts as will fit in the work envelope of the machine with…
The Internet Makes Small Maker Businesses Possible
The Internet is absolutely what makes many small maker businesses possible. Without it, I’d probably never have gotten into mold making, and even if I had I’d be relegated to advertising in the classifieds in the back of trade and hobby magazines.I do trade worldwide because of the Internet. I have customers from Australia and…