Similar Posts
Bob’s Tips for Boaters #12 – Its a PUSH Pole Not a PRY Pole
Many of us have a push pole for area where its more practical to pole than to motor. Flat’s anglers often use a push pole to avoid stirring up silt as they chase shallow water trophies. I use one quite often to help me get into and out of tight spots when fishing. You probably…
2005 Mercury 50 ELPTO Fuel Line T – Another Boat Project That May Never Gets Finished…
It can be really frustrating working on outboards sometimes. In this case I was replacing the fuel lines on the outboard for “The Tin Can.” I’m thinking I might use it on “Whisker Seeker” since the outboard that came with Gary’s boat was always a bit undersized for it. Whisker Seeker is rated for 60,…
IS IT BAD LUCK OR OVERCONFIDENCE? (picture)
The first thing I’m putting in my new boat.
That is one sexy header pipe… (picture) (updated: Sept 16th 2023)
This is a 2:1 header for a Harbor Freight Predator 670. I don’t know how much I’ll modify the engine, but if you follow along with posts and videos about Bar Hopper you will learn as I do. It’s my understanding that I’ll need to reject the HF stock carburetor immediately after installing (or during…
Holeshot & Ride
Hole shot generally refers to how long it takes your boat to go from displacement to plaining speed. For most plaining hulls the best hole shot is accomplished by trimming the motor/outdrive all the way down, and going full throttle as quickly as possible. Push the throttle all the way to the stop very quickly…
You know what this means…
You know what this means… IT MEANS I DON’T GET TO GO FISHING OFTEN ENOUGH. All these new stickers are sitting on my desk waiting for me to need to put them on the appropriate boat. I think I’m going to start refusing more custom work so I can go fishing a little more often.