You know what this means…
IT MEANS I DON’T GET TO GO FISHING OFTEN ENOUGH.
All these new stickers are sitting on my desk waiting for me to need to put them on the appropriate boat. I think I’m going to start refusing more custom work so I can go fishing a little more often.
The first trip out in the new rig was an adventure. It launched pretty easy for a 20 foot 9 inch boat. I unhooked it, and stepped off the trailer tongue onto the boat to idle over to the dock. I quickly realized I’d left the keys in the truck. Oops. No problem. The trolling…
This is a 2:1 header for a Harbor Freight Predator 670. I don’t know how much I’ll modify the engine, but if you follow along with posts and videos about Bar Hopper you will learn as I do. It’s my understanding that I’ll need to reject the HF stock carburetor immediately after installing (or during…
This was the first time I had ever actually fished with this little resin poured crank bait. I had made the original mold over a year prior. (Five years ago now.) I made a few baits and tested them in the pool before shipping off the first molds. I made some more of the mold,…
It can be really frustrating working on outboards sometimes. In this case I was replacing the fuel lines on the outboard for “The Tin Can.” I’m thinking I might use it on “Whisker Seeker” since the outboard that came with Gary’s boat was always a bit undersized for it. Whisker Seeker is rated for 60,…
Hole shot generally refers to how long it takes your boat to go from displacement to plaining speed. For most plaining hulls the best hole shot is accomplished by trimming the motor/outdrive all the way down, and going full throttle as quickly as possible. Push the throttle all the way to the stop very quickly…
I added a few things you all might (and might not) be interested in. Look below for UPDATEs. Original Post Below: By Bob La Londe November 3, 2023 I was visiting with a friend yesterday (If you know me you know I currently only have four people I call friend, so you might be able…
