Casting Metal Sources
From Making Stuff For The Shop
https://www.tacklemaker.info/index.php?topic=102.0
Similar Posts
Not Much Fishing Or Outdoors Related – EV, EV Charger, Foam, Molds, Mud Motor Parts, Welding, etc
I’ve been busy with other projects. Work of course. Due to a variety of higher priority demands on my time I just haven’t hade much time for things like fishing or working on boats. I still haven’t even installed the winch on the Jeep yet. I installed an EV charging station in my garage for…
Clear Coat / Finish for Hard Baits
Clear Coat / Finish for Hard Baits If started a semi serious range of experiments for that final clear coat for hard baits. That first line of defense against rocks, teeth, and branches. There is an open discussion starting on the topic over on Tackle Maker if you would like to follow along or contribute….
Geometric Self Opening Die Heads
Geometric Self Opening Die Heads I’ve made simple die heads. Some driven by a tommy bar, others by a pin in the mandrel that can be set up come out of the groove and free spin when it reaches the stopping distance. recently I started researching my $350 Lin Huan TL-25 lathe score in the…
Another Machine In The Shop For Roughing Blanks
Its going to get used for roughing blanks, but its going to take a lot of work to retrofit it to a modern control before I can use it. Probably the first chore will be getting it off the trailer, and onto a pallet to move it around the shop. VIDEO:
Those Axles – 2
Well… nothing much to get excited about. I got the old axles off. Okay they are heavy. Maybe solid. Never expected that. The old spring stacks are also much taller than the new spring stacks. I’m going to see if I can use the old springs and hardware, but the tires and wheels are slightly…
So Far Today…
So far today I haven’t really done much. Some is fishing related, however. I spent some time with machines running in the background repairing a couple of my favorite rods. A flipping stick that needed a new tip top, and a multipurpose rod I really like needing a new tip top and a new double…