Short Take – Another Boat Project That May Never Get Finished
VIDEO: Preparing to get some work done.
VIDEO: Preparing to get some work done.
It can be really frustrating working on outboards sometimes. In this case I was replacing the fuel lines on the outboard for “The Tin Can.” I’m thinking I might use it on “Whisker Seeker” since the outboard that came with Gary’s boat was always a bit undersized for it. Whisker Seeker is rated for 60,…
Some of you might remember this test of 10+ year old 2 part flotation foam? I originally posted this video 2 years ago. I can tell you that while it might have been fine after 10-12 years on the shelf unopened, when I opened it today to actually start pouring some foam into Whisker Seeker…
Of course I still have a business to run, and customers insist I eventually make them the parts they pay for. Making molds isn’t as much fun as it used to be, but of course its still fun, and once in a while I still get to see something a little bit original before anybody…
One of the things I did the other day making room to work on Whisker Seeker out of the sun was make some big hooks for things for extension cords, flex conduit, extra stock air, wire, cable, liquid, and oil lines, etc. It took up more space on the floor than you might think. The…
Okay, I took several days worth of work and distilled it down to just a bit under 30 minutes. This may be the first significant forward step and is certainly a significant milestone in bringing Whisker Seeker back to life. Part 5a & 5b. For those who are up to speed Part 5b is posted…