Similar Posts
Not Much Fishing Or Outdoors Related – EV, EV Charger, Foam, Molds, Mud Motor Parts, Welding, etc
I’ve been busy with other projects. Work of course. Due to a variety of higher priority demands on my time I just haven’t hade much time for things like fishing or working on boats. I still haven’t even installed the winch on the Jeep yet. I installed an EV charging station in my garage for…
(Video) Whisker Seeker Gets Her Sole – Part 5b
Okay, I took several days worth of work and distilled it down to just a bit under 30 minutes. This may be the first significant forward step and is certainly a significant milestone in bringing Whisker Seeker back to life. Part 5a & 5b. For those who are up to speed Part 5b is posted…
Short Take – Another Boat Project That May Never Get Finished
VIDEO: Preparing to get some work done.
Everything Takes so Freaking Long
Of course I still have a business to run, and customers insist I eventually make them the parts they pay for. Making molds isn’t as much fun as it used to be, but of course its still fun, and once in a while I still get to see something a little bit original before anybody…
Throwing Good Money After Bad
One of the things I did the other day making room to work on Whisker Seeker out of the sun was make some big hooks for things for extension cords, flex conduit, extra stock air, wire, cable, liquid, and oil lines, etc. It took up more space on the floor than you might think. The…
NOT AFTER ITS BEEN OPENED – 10 Year Old Flotation Foam
Some of you might remember this test of 10+ year old 2 part flotation foam? I originally posted this video 2 years ago. I can tell you that while it might have been fine after 10-12 years on the shelf unopened, when I opened it today to actually start pouring some foam into Whisker Seeker…