New Nail Weight Mold

ByBob La Londe

INTRODUCTORY PRICING ENDS SOON

This nail weight molds is 12 cavities

  • 6 apx 1/8oz
  • 6 apx 1/16oz
  • Want to adjust the weight for that exact fit.  Snip it to length.

HOW TO USE THIS MOLD – Its works best if:

  1. You should preheat the mold.  Leave it on top of your lead pot to warm up, or just pour it a few times.
  2. Lightly dust the cavities with talcum powder or other fine (heat resistant) powder.  The fine particles break up the surface tension of the lead and allow it to flow better.
  3. Pressure cast the mold.  Use a bottom pour pot and hold the gate for the cavity seated firmly against the nozzle on the bottom of the bottom pour pot so the weight of the lead in the pot pressurizes the lead in the cavity.
  4. By following the steps above I was able to get 12 out of 12 good castings.

Purchase: DISCOUNTED INTRODUCTORY PRICING https://www.cncmolds.com/webstore/lead-casting-molds/sinkers/nail-weight-12-cavity-1/8-1/16-oz-apx
WATCH FULL TEST VIDEO ON RUMBLE – Test, Fail, Success https://rumble.com/v71odl8-test-fail-success-nail-weight-mold-brand-new.html

Similar Posts